Epson WF-C17590 Series - Installing the Notifier; When Installing the Notifier on a Client Computer

Make sure that the Epson Print Admin or the target printer icon has been created in Control Panel > Devices and
Printers.
Installing the Notier
Install the Epson Print Admin Notier. When you install the soware, you will see the the user ID, the cost limit, a
link to the user's page, and inquiries from Epson Print Admin.
e
installation method varies depending on the system
conguration.
Contact your system administrator for
more information.
❏ When installing the
Notier
on a client computer
❏ When sending notications from the server
!
Caution:
You cannot install multiple instances of the
Notier
on a single client computer.
Note:
e Notier is registered to Windows Startup and launches automatically when you start Windows.
When installing the
Notier
on a client computer
If your system does not use the Windows Server Group Policy, or if you are using Mac OS, you can download and
install the user-only Notier to the client computer.
If the package that was created in EpsonNet SetupManager has been delivered, run the package to install drivers
and Notier automatically (Windows only).
1. Access the user page.
e URL to log in to the user page is sent in the Welcome email. Contact your system administrator if the
Welcome email is not delivered.
2. Enter the user ID and password, and then select the domain. Click Login.
If the user is managed by an LDAP server, select the LDAP server domain, and then enter the password for the
LDAP server.
If the user is not managed by an LDAP server, select (Local) as the domain, and then enter the password for
the user page.
User's Guide
Preparing for Use
15