Epson WF-C17590 Series - Changing the ID Number

4. Select Change Password
5. Enter the password set for the user page in Current password.
6. Enter the new password in New password, and then enter it again in New password (conrm).
7. Click OK.
e registration completion message is displayed.
8. Click OK.
Changing the ID Number
If the system administrator allows "authentication by ID number" and "changing the ID number", the user can
change the ID number to log in from the control panel.
1.
Access the user page.
e URL of the login menu on the user page is provided in the registration completion notication email. A
link to the user page has been displayed in the Epson Print Admin
Notier.
2. Enter the user ID and password, and then select the domain. Click Log in.
If you are linked with an LDAP server, select the LDAP server domain. Enter the password for the LDAP
server.
User's Guide
Solving Problems
41