Epson WF-C17590 Series - When Sending Notifications from the Server (Windows Only); Registering an Authentication Card

Note:
For Windows, the message "Could not verify the msi publisher" may be displayed depending on the browser settings.
Click Run to continue the installation.
6. Follow the on-screen instructions to install the Notier.
If the user account setting screen is displayed, enter the User ID used to log in to the user page.
7. When the installation is complete, the Notier starts automatically.
When sending notications from the server (Windows only)
If you are using the Windows Server Group Policy, you can install the
Notier
on the user's computer
automatically.
When the installation is complete, the Notier starts automatically.
Registering an authentication card
If you are using an authentication card for Epson Print Admin, you need to register the user authentication card.
Note:
❏ e card may be already have been registered by your system administrator. Contact your system administrator for more
information.
❏ For multi-function devices connected by wireless LAN that have entered power-saving mode, it may take some time to
recognize the authentication card. You may need to hold your card over the device again.
User's Guide
Preparing for Use
17