Using Epson Print Admin
Checking available functions
e system administrator can setup the multi-function device, functions, time zones, and so on that each user can
access in Epson Print Admin. Login to the user page before use, and then check the available functions such as
printing and scanning.
❏ Login to the user page
❏ Checking available functions and the credit
Related Information
& “Logging in to multi-function devices” on page 20
& “User Information” on page 36
Authenticated Printing
e system can print by authenticating the user. You need a registered authentication card, user ID and password,
or ID Number.
Logging in to multi-function devices
You can login to the multi-function device from its control panel.
If the authentication device is not connected
You can log in by entering a user ID and password or entering an ID Number.
e ID Number is issued automatically by Epson Print Admin.
1.
Press User ID and Password or ID Number on the control panel of the multi-function device.
User ID and Password and ID Number display additional authentication methods, as well as authenticating
by using a card.
2. Enter the user ID and password, and then select the domain or enter the ID Number.
User ID and password are the same as the user ID and password to log in to the Epson Print Admin users
page.
Select the domain from the following.
❏ For users that are managed by the LDAP server: LDAP server domain name
❏ For users that are managed by Epson Print Admin : (Local)
3. Press Log in.
User's Guide
Using Epson Print Admin
20
To Next Page
Loading...
