Copying
Copying
Copying Basics
is section explains the steps for basic copying.
1. Place the originals.
When you want to copy multiple originals, place all of the originals in the ADF.
2.
Tap Copy on the home screen.
3. Check the settings in Basic Settings.
Tap the setting item to change it as necessary.
Note:
❏ Tap the Advanced tab to make copy settings such as Original Type, Mixed Size Originals, or Image Quality, and
copy menus such as Book →2Pages or ID Card Copy.
❏ If you tap
, you can register frequently used copy settings as presets.
❏ If the combination of paper related settings you require is not available,
is displayed. Tap the icon to check the
details, and then change the settings.
4. Tap the value of the number of copies, and then enter the number of copies using the on-screen keypad.
5. Tap
, and then check the scanned image and the settings such as the paper size.
Note:
You cannot preview when loading your originals in the ADF.
6. Tap
x
.
User's Guide
Copying
47
To Next Page
Loading...
Need help?
General