116
You see a screen like this:
5. To print more than one copy, press a number key on the product's control panel, or select Copies
and use the on-screen keyboard to enter the number of copies.
Note: If you want to print copies using a saved group, select Advanced and then select Print Sets.
Select the group you want to use and select OK.
6. Change any of the displayed settings as necessary.
7. Select Advanced to view and change additional copy settings, if necessary.
Note: To save the copied image to the product's internal storage, select File Storing and enable the
File Storing setting. Change any of the displayed settings as needed.
Note: If there is an image at the hole punch position, select Binding Margin and set a binding
margin of 0.71 inch (18 mm) before copying. If you set a binding margin, you can select Binding
Width, Reduce to Fit Paper, orErase Image Over Margin to adjust your image accordingly.
8. Select Preview to preview your copy on the LCD screen.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
