Epson WF-M21000 - Turning off the Operation Time out Setting

38
1. Press the home button, if necessary.
2. Select Settings > General Settings > Basic Settings > LCD Brightness.
You see a screen like this:
3. Select the – or + icons to decrease or increase the brightness.
4. Select OK to exit.
Parent topic: Using the Control Panel
Turning Off the Operation Time Out Setting
The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes
of inactivity. This feature is enabled by default, but you can turn it off.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select Settings > General Settings > Basic Settings.
Downloaded from ManualsNet.com search engine