435
Automatic Document Feeder (ADF) Specifications
Paper size A6 (4.1 × 5.8 inches [105 × 148 mm]) to A3 (11.7 × 16.5 inches
[297 × 420 mm])/11 × 17 inches (279 × 432 mm) (Maximum 11.7 ×
17 inches [297 × 431.8 mm])
Paper type Plain paper, high quality paper, recycled paper
Paper weight One-sided printing: 10 lb (38 g/m
2
) to 35 lb (128 g/m
2
)
Double-sided printing: 14 lb (50 g/m
2
) to 35 lb (128 g/m
2
)
Sheet feeding capacity Total thickness: 0.65 inch (16.5 mm)
Approximately 150 sheets at 22 lb (80 g/m
2
)
Note: Depending on the quality of the paper, originals that meet the ADF specifications still may not feed
or scan correctly.
Caution: Do not load the following types of originals in the ADF, or they may be damaged or may
damage the scanner. Use the scanner glass for these types:
• Photos or valuable original artwork
• Thermal paper
• Originals containing staples or paper clips
• Originals with carbon paper backing
• Originals that are bound
• Originals with labels, stickers, or sticky notes
• Originals that are ripped, curled, folded, deteriorated, or wrinkled
• Originals with holes
• Originals that are irregularly cut or shaped
• Originals that have not dried or cooled from printing
Parent topic: Technical Specifications
Fax Specifications
Specifications only applicable to models with optional fax board installed.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
