Epson WF-M21000 - Page 120

120
Copying option Available settings Description
Book>2Pages Off Select On to copy two pages of a book onto separate sheets
of paper. You can also choose the Scan Order.
On
Continuous
Scanning
Off Select On to scan a large quantity of originals placed in the
ADF as one job.
On
Image Quality Various settings Select advanced quality settings such as Saturation and
Sharpness.
Binding Margin Off Select On to adjust the margin and orientation of the pages
when copying a book. You can also select the Binding
Position and Orientation. Select Binding Width to shift
the image out of the binding margin, Reduce to Fit Paper to
shrink the image to fit into the printing area, or Erase Image
Over Margin to only print the part of the image that is
outside of the binding margin.
On
Reduce to Fit
Paper
Off Select On to automatically decrease the image by the
percentage you select.
On
Remove Shadow Off Select On to erase the shadows that appear in the center of
a document when copying a book or that appear around a
document when copying thick paper.
On
Remove Punch
Holes
Off Select On to erase the binding holes on a document. You
can also select the Erasing Position and Orientation.
On
ID Card Copy Off Select On to copy both sides of an ID card onto one side of
a sheet of paper. You can also select the Orientation.
On
Print Sets Various settings Allows you to copy the document in groups of saved
quantities and settings.
Output Tray Various settings Select the output tray for your copies.
Downloaded from ManualsNet.com search engine