124
Note: Depending on the original, red characters may still appear. If you select Color as the color mode,
the copy itself will be monochrome but it is counted as a color copy. If you select Auto as the color mode
and the scanner detects that the original is in color, it is counted as a color copy even if the copy itself is
monochrome.
1. Place your original document or photo on the scanner glass, or place multi-page documents in the
ADF.
2. Press the home button, if necessary.
3. Select Copy.
You see a screen like this:
4. Select Advanced and then enable Erase Red Color.
Note: The preview screen displays an image of the original before red characters are removed.
5. Select the Copy icon.
Parent topic: Copying
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
