6. Check the printed pattern and follow the instructions on the screen to choose the number
representing the best printed pattern for each set.
Vertical alignment
Horizontal alignment
• After choosing each pattern number, click Next.
• If no patterns are aligned in one or more of the sets, choose the closest one in each set and click
Realignment. Then print another alignment sheet and check it.
Note: Click Skip (where available) if you want to skip a particular alignment sheet.
7. When you are done, click Finish.
Parent topic: Print Head Alignment
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink.
1. Make sure there are no errors on the LCD.
2. Press the home button, if necessary.
3. Select Setup.
4. Select Maintenance.
272
To Next Page
Loading...
