Epson WorkForce 545 User Manual

10. Lower the scanner unit.
The print head moves to its home position and the printer starts charging the ink. This takes about
2.5 minutes. When you see a confirmation message on the screen, ink charging is finished.
Caution: Never turn off the product while the Onlight is flashing or you will waste ink.
If you see an error screen telling you an ink cartridge is installed incorrectly, lift up the scanner unit
and press the ink cartridge down until it clicks into place. When you're finished, press the OK button.
If you remove a low or expended ink cartridge, you cannot re-install and use the cartridge.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the printer. The valve in the ink supply port is designed to contain
any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with
the label facing up; do not store cartridges upside-down.
Parent topic: Replacing Ink Cartridges
Related concepts
Purchase Epson Ink Cartridges
241

Epson WorkForce 545 Specifications

Print Specifications

maximum print resolution	5760 x 1440 optimized dpi
ISO print speed black	15 ISO ppm
ISO print speed color	7.2 ISO ppm

Copy Specifications

maximum copy size	8.5" x 14"
ISO copy speed black	12 ISO cpm
ISO copy speed color	5.5 ISO cpm

Scan Specifications

optical resolution	2400 dpi
hardware resolution	2400 x 2400 dpi
maximum resolution	9600 x 9600 dpi

Fax Specifications

modem speed	33.6 Kbps
fax memory	up to 180 pages
speed dials	60 (max.)

Power Specifications

rated voltage	100 – 120 VAC
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Weight and Dimensions

printing dimensions (W x D x H)	17.6" x 21.9" x 9.4"
storage dimensions (W x D x H)	17.6" x 14.2" x 8.9"
weight	17.6 lb