Epson WorkForce 545 User Manual

6. If there are no gaps, click Finish.
If there are gaps or the pattern is faint, clean the print head.
Parent topic: Print Head Nozzle Check
Related concepts
Print Head Cleaning
Print Head Cleaning
If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.
Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it
when a cartridge is low. You must replace the cartridge first.
Cleaning the Print Head Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility
Parent topic: Print Head Maintenance
Related topics
Replacing Ink Cartridges
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Make sure plain paper is loaded in the product.
2. Press the Setup button.
3. Press the arrow buttons to select Maintenance and press the OK button.
You see this screen:
251

Epson WorkForce 545 Specifications

Print Specifications

maximum print resolution	5760 x 1440 optimized dpi
ISO print speed black	15 ISO ppm
ISO print speed color	7.2 ISO ppm

Copy Specifications

maximum copy size	8.5" x 14"
ISO copy speed black	12 ISO cpm
ISO copy speed color	5.5 ISO cpm

Scan Specifications

optical resolution	2400 dpi
hardware resolution	2400 x 2400 dpi
maximum resolution	9600 x 9600 dpi

Fax Specifications

modem speed	33.6 Kbps
fax memory	up to 180 pages
speed dials	60 (max.)

Power Specifications

rated voltage	100 – 120 VAC
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Weight and Dimensions

printing dimensions (W x D x H)	17.6" x 21.9" x 9.4"
storage dimensions (W x D x H)	17.6" x 14.2" x 8.9"
weight	17.6 lb