Epson WorkForce 545 User Manual

Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned on
and wait at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of
the ink cartridges may be old or damaged and needs to be replaced.
Parent topic: Print Head Cleaning
Related topics
Replacing Ink Cartridges
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Aligning the Print Head Using a Computer Utility
Parent topic: Adjusting Print Quality
Related concepts
Print Head Cleaning
256

Epson WorkForce 545 Specifications

Print Specifications

maximum print resolution	5760 x 1440 optimized dpi
ISO print speed black	15 ISO ppm
ISO print speed color	7.2 ISO ppm

Copy Specifications

maximum copy size	8.5" x 14"
ISO copy speed black	12 ISO cpm
ISO copy speed color	5.5 ISO cpm

Scan Specifications

optical resolution	2400 dpi
hardware resolution	2400 x 2400 dpi
maximum resolution	9600 x 9600 dpi

Fax Specifications

modem speed	33.6 Kbps
fax memory	up to 180 pages
speed dials	60 (max.)

Power Specifications

rated voltage	100 – 120 VAC
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Weight and Dimensions

printing dimensions (W x D x H)	17.6" x 21.9" x 9.4"
storage dimensions (W x D x H)	17.6" x 14.2" x 8.9"
weight	17.6 lb