Epson WorkForce 545 User Manual

Placing Originals on the Product
Follow the instructions here to place your original documents or photos on the product.
Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid
damaging it.
Placing Originals on the Scanner Glass
Placing Originals in the Automatic Document Feeder
Placing Originals on the Scanner Glass
You can place originals up to this size on the scanner glass: Letter (8.5 × 11 inches [216 × 279 mm]) or
A4 (8.3 × 11.7 inches [210 × 297 mm]).
1. Open the document cover.
2. Place your original facedown on the scanner glass with the top facing as shown. Slide the original to
the edges of the indicated corner.
Note: You can place multiple originals on the scanner glass. Just make sure they are at least 0.2
inch (5 mm) away from each other.
3. Close the document cover gently to keep your original in place.
Parent topic: Placing Originals on the Product
48

Epson WorkForce 545 Specifications

Print Specifications

maximum print resolution	5760 x 1440 optimized dpi
ISO print speed black	15 ISO ppm
ISO print speed color	7.2 ISO ppm

Copy Specifications

maximum copy size	8.5" x 14"
ISO copy speed black	12 ISO cpm
ISO copy speed color	5.5 ISO cpm

Scan Specifications

optical resolution	2400 dpi
hardware resolution	2400 x 2400 dpi
maximum resolution	9600 x 9600 dpi

Fax Specifications

modem speed	33.6 Kbps
fax memory	up to 180 pages
speed dials	60 (max.)

Power Specifications

rated voltage	100 – 120 VAC
rated frequency	50 – 60 Hz
rated current	0.6 Amp

Operating Environment

operating temperature	50 ° to 95 °F (10 ° to 35 °C)
storage temperature	-4 ° to 104 °F (-20 ° to 40 °C)
operating relative humidity	20 – 80%

Weight and Dimensions

printing dimensions (W x D x H)	17.6" x 21.9" x 9.4"
storage dimensions (W x D x H)	17.6" x 14.2" x 8.9"
weight	17.6 lb