Epson WorkForce 545 - Copying Options

• 8 × 10 inches (203 × 254 mm)
• Letter (8.5 × 11 inches [216 × 279 mm])
• A4 (8.3 × 11.7 inches [210 × 297 mm])
Parent topic: Copying
Copying Options
Select the Paper and Copy Settings you want to use for your copies.
Note: Not all options or settings may be available, depending on other copying settings.
Copying option Available settings Description
2-Sided Printing 1>1-Sided Uses the duplexer and ADF to make 2-sided copies
(WorkForce 645
1>2-Sided
Series only)
2>1-Sided
2>2-Sided
Layout Borderless Expands the image to the edge of the paper (slight cropping
may occur)
With Border Leaves a small margin around the image
2-up Copy Copies 2 originals on a single sheet
Reduce/Enlarge Custom Size Automatically sizes the image by the percentage you select
Actual Size Copies at 100% size, unless you select a different
percentage as the Custom Size setting
Auto Fit Page Automatically sizes the image to fit the selected paper size
setting
Legal->Letter and Automatically converts from one size to another
other conversions
Quality Draft Provides lower quality for draft copies (plain paper only)
Standard Quality Provides good quality for most copies
Best Provides the highest quality for special copies
58