Epson WorkForce 610 Series

Inserting the Card 27
8. When you’re done selecting and cropping photos,
press
OK . You see the Print Preview screen:
9. To change any of the print settings displayed on the
screen, press
Menu , press l or r to select Print
Settings
, press OK , and select your settings. After
you finish selecting your settings, press
OK again.
10. To change any of the photo adjustments displayed on the screen, press
Menu ,
l or r to select Photo Adjustments , press OK , and select your settings. After
you finish selecting your settings, press
OK again.
11. When you’re ready to print, press
Start .
To cancel printing, press
y Stop/Clear Settings .
Note:
To switch the display screen from displaying one photo at a time to 9 photos at a
time, press the Display/Crop button 3 times when viewing your photos.