Epson WorkForce 610 Series User Manual

38 Maintaining Your All-in-One
Maintaining Your All-in-One
Follow the steps here to check and clean the print head, and replace ink cartridges.
To align the print head, if necessary, see the online Epson Information Center.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, the print head nozzles may be
clogged. Follow these steps to check the print head nozzles:
1. Load letter- or A4-size plain paper in the sheet feeder (see page 6).
2. Press the
Home button.
3. Press
l , r , u , or d to select Setup , then press OK .
4. Press
l or r to select Maintenance , then press OK .
You see this screen:
5. Select
Nozzle Check and press OK .
6. Press
x Start .
7. Check the nozzle check pattern that prints to see if
there are gaps in the lines.
8. If there are no gaps, the print head is clean. Select
Finish Nozzle Check and
press
OK .
If there are gaps or the pattern is faint, select
Head Cleaning and press OK .
Then press
x Start to clean the print head.
Nozzles
are clean
Nozzles need
cleaning

Epson WorkForce 610 Series Specifications

General

Functions	Print, Copy, Scan, Fax
Max Print Resolution	5760 x 1440 optimized dpi
Fax Modem Speed	33.6 Kbps
Duplex Printing	Manual
Display	2.5-inch LCD
Print Technology	Inkjet
Print Speed (Black)	Up to 38 ppm
Print Speed (Color)	Up to 38 ppm
Copy Speed (Black)	Up to 38 cpm
Copy Speed (Color)	Up to 38 cpm
Copy Resolution	1200 x 2400 dpi
Scanner Type	Color Flatbed
Scan Resolution	1200 x 2400 dpi
Paper Capacity	250 sheets
Automatic Document Feeder	30 sheets
Connectivity	USB 2.0, Ethernet, Wi-Fi
Ink Palette	Cyan, Magenta, Yellow, Black
Ink Cartridges	4 individual ink cartridges
Operating Systems	Windows, Mac OS