Epson WorkForce Pro WF-C5710 User Manual

320
6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle
Check Pattern and click Print.
7. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
• If there are no gaps, click Finish.
• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing. Then try cleaning the print head again. If quality still does not improve, contact Epson.
Parent topic: Print Head Cleaning
Related tasks
Loading Paper in the Cassette
Cleaning the Print Head Using the Product Control Panel
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel

Epson WorkForce Pro WF-C5710 Specifications

General

Print Resolution	4800 x 1200 dpi
Automatic Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct, NFC
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes, 50-sheet capacity
Ink Type	DURABrite Ultra pigment ink
Print Technology	PrecisionCore
Print Speed (Black/Color)	24 ppm (black/color)
Paper Capacity	330 sheets
Monthly Duty Cycle	45, 000 pages
Scanner Type	Color flatbed scanner
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print, Mopria
Paper Sizes	A4, A5, A6, B5, Letter, Legal