Epson WorkForce Pro WF-C5710 User Manual

56
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the home button, if necessary.
2. Press the icon.
You see a screen like this:
3. Select Router.
4. Select Push Button Setup (WPS).
5. Follow the instructions on the LCD screen to complete WPS setup.
6. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the Start Here sheet.
Note: If you don't see the icon, repeat these steps to try again.

Epson WorkForce Pro WF-C5710 Specifications

General

Print Resolution	4800 x 1200 dpi
Automatic Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct, NFC
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes, 50-sheet capacity
Ink Type	DURABrite Ultra pigment ink
Print Technology	PrecisionCore
Print Speed (Black/Color)	24 ppm (black/color)
Paper Capacity	330 sheets
Monthly Duty Cycle	45, 000 pages
Scanner Type	Color flatbed scanner
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print, Mopria
Paper Sizes	A4, A5, A6, B5, Letter, Legal