Epson WorkForce Pro WF-C5710 User Manual

55
You see a screen like this:
6. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
7. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly from
your computer or device, and then print. If you are printing from a computer, make sure you installed
the network software as described on the Start Here sheet.
Note: If you don't see the icon on the LCD screen, you may have selected the wrong network
name or entered the password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Direct Mode Setup
Related references
Status Icon Information
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Epson WorkForce Pro WF-C5710 Specifications

General

Print Resolution	4800 x 1200 dpi
Automatic Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct, NFC
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes, 50-sheet capacity
Ink Type	DURABrite Ultra pigment ink
Print Technology	PrecisionCore
Print Speed (Black/Color)	24 ppm (black/color)
Paper Capacity	330 sheets
Monthly Duty Cycle	45, 000 pages
Scanner Type	Color flatbed scanner
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print, Mopria
Paper Sizes	A4, A5, A6, B5, Letter, Legal