Epson WorkForce Pro WF-C5710 User Manual

341
7. Select Start.
The nozzle pattern prints.
8. Do one of the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check the other solutions in this guide or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean the print head.
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic: Solving Problems
Related concepts
Print Head Cleaning
Uninstall Your Product Software
Related references
Where to Get Help
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select Settings > General Settings > System Administration. Enter the administrator password, if
necessary.
3. Scroll down and select Restore Default Settings.

Epson WorkForce Pro WF-C5710 Specifications

General

Print Resolution	4800 x 1200 dpi
Automatic Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct, NFC
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes, 50-sheet capacity
Ink Type	DURABrite Ultra pigment ink
Print Technology	PrecisionCore
Print Speed (Black/Color)	24 ppm (black/color)
Paper Capacity	330 sheets
Monthly Duty Cycle	45, 000 pages
Scanner Type	Color flatbed scanner
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print, Mopria
Paper Sizes	A4, A5, A6, B5, Letter, Legal