EasyManua.ls Logo

Epson WorkForce Pro WF-C5710 - External USB Device Specifications; Network Interface Specifications

Epson WorkForce Pro WF-C5710
414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
392
Parent topic: Technical Specifications
External USB Device Specifications
Do not use devices with the following requirements:
Dedicated driver
Security settings, such as password or encryption, etc.
USB memory device 2TB
Formatted in FAT, FAT32, or exFAT
Note: Epson cannot guarantee the operation of externally connected devices.
Parent topic: Technical Specifications
Network Interface Specifications
Wi-Fi
Standard IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE
802.11 b/g/n, depending on purchase location
Security WPA2-PSK (AES); complies with WPA2 standards with support for
WPA/WPA2 Personal
WEP (64/128 bit)
Frequency band 2.4 GHz
Maximum radio-frequency
power transmitted
19.8 dBm (EIRP)
Communication mode Infrastructure mode
Wi-Fi Direct (Simple AP)
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.

Table of Contents

Other manuals for Epson WorkForce Pro WF-C5710

Related product manuals