Epson WorkForce Pro WP-4500 Series - Environmental; Standards and Approvals

Input frequency range
49.5 to 60.5 Hz
Rated current
0.7 to 0.35 A
Power consumption Standalone
copying
Approx. 19 W (ISO/IEC24712)
Ready mode
Approx. 9.5 W
Sleep mode
Approx. 3.8 W
Power off
Approx. 0.3 W
Note:
Check the label on the back of the printer for its voltage.
Environmental
Temperature
Operation:
10 to 35 ˚C (50 to 95 ˚F)
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Humidity
Operation:*
20 to 80% RH
Storage:*
5 to 85% RH
* Without condensation
Standards and approvals
WP-4530/WP-4531/WP-4535/WP-4540/WP-4545
U.S. model:
Safety
UL60950-1
CAN/CSA-C22.2 No.60950-1
EMC
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module.
Manufacture: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept responsibility for
any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation of the device.
WP-4511/4515/4521/4525/4530/4531/4535/4540/4545 User’s Guide
Product Information
192