EasyManua.ls Logo

Epson WorkForce WF-7710 - Cleaning the Paper Guide

Epson WorkForce WF-7710
343 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
254
Horizontal Alignment: Select the number representing the pattern with the least amount of
separation or overlap.
8. Select Done.
Parent topic: Print Head Alignment
Related tasks
Loading Paper for Documents in the Cassette
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink. If
paper does not feed correctly from the rear paper feed slot, you can use a cleaning sheet to clean the
rollers.
1. If printouts are smeared or scuffed, load plain paper in the paper source that you want to clean in this
size: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]).
2. Select Settings > Maintenance > Paper Guide Cleaning.
3. Select the paper source you want to clean.
4. Follow the on-screen instructions to clean the paper guide.
5. Repeat these steps as necessary until the paper comes out clean. If you are using a cleaning sheet,
repeat these steps up to 3 times.
Note: If the paper is not clean after cleaning several times, try cleaning the other paper sources.
Parent topic: Adjusting Print Quality
Related topics
Loading Paper

Table of Contents

Related product manuals