EasyManuals Logo

Epygi QX200 Installation Guide

Default Icon
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
QX50/QX200/QX2000; (SW Version 6.0.x) 34
QX50/QX200/QX2000 Manual I: Installation Guide
the public phone with the extension attached to this line forgot to log out after using it. With
this option enabled, once the expiration time arrives, the extension will automatically log out
from the public phone.
The following options are available:
Never the extension will never expire and will remain logged in to the public
phone.
After the defined period of time requires the period after which the extension
will automatically log out from the public phone.
At the certain moment requires the moment (hour and minute) when the exten-
sion will automatically log out from the public phone.
Press Save to apply the settings for the IP line.
Reset the SIP Phone to factory default. After restart, the appropriate configuration will be au-
tomatically downloaded from the QX IP PBX to the SIP Phone.
Please Note: For automatic configuration, some SIP phones may require additional actions to
follow the restart. You may also find the detailed installation instructions of the Epygi’s sup-
ported IP Phones in the Configuring Epygi Supported IP Phones” document published on
Epygi’s Web portal.
To make sure the line configuration works properly, do the following:
Go to Status System Status IP Lines Registration tab to see if IP Line registra-
tion is successful.
Dial *74 to get the line information.
Make outgoing and accept incoming calls.

Other manuals for Epygi QX200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epygi QX200 and is the answer not in the manual?

Epygi QX200 Specifications

General IconGeneral
BrandEpygi
ModelQX200
CategoryNetwork Hardware
LanguageEnglish

Related product manuals