Reset barcode production: 0B240 01
Leading command for global / local code
(B) Add the characters from the end
Function is similar to the above setup except for the
added position in the tail.
Bar code production: 02500000 08 4 ABCD
The leading command specifies the character length to be with
Global / local code previously, ranging from 32 to 126
Length of character to be added, range from 1 to 9 visible ASCII
characters.
Reset barcode production: 0B250 08
Leading command for global / local code
(C) Add the characters from the barcode
The function is to start inserting the characters to
be added at any specified location in the barcode. For
example, the resolved barcode 1234, the specified
position is 1, the specified character is ABC, then the
output is 1ABC234.
Bar code production: 02600000 06 002 5 ABCDE
Leading command, which specifies the character
Global / local code length should correspond to the previous, fan
Specified location, the range is 001 to 250 circumference is 32 to
126 visible
Length of character to be added, the range from 1 to 9 ASCII
characters.
Reset barcode production: 0B260 06
Leading command for global / local code
（6）delete character
To Next Page
Loading...