As long as the specified character appears in the
barcode data, filter out the character, and output
Other data. For example, if the barcode data is
A12A34AA56789A and the specified character is A, the
output is 123456789.
Barcode production: 02300000 02 7
The leading command specifies a character, and up to the ASCII
Visible characters with a global / local substitution value of 32
to 126.
The above means means EAN-13,, off transmit character
7.
Reset barcode production: 0B230 02
Leading command for global / local code
（5） Add characters
Add a character description from the beginning, from
the tail, and from the middle.
（a） Add characters from scratch. Add the specified
character to the header of the barcode.
For example, when the barcode is parsed to 1234, the
character to be added is ABC, then ABC1234 is output.
Barcode production: 02400000 01 3 ABC
The leading command specifies the character length to be with
Global / Local code Front correspondence, range from 32 to 126
Length of character to be added, range from 1 to 9 visible ASCII
characters
The above setting code means: add 3 characters "ABC" to
the front end of the UPC-A code.
To Next Page
Loading...