4 • Service mode
14 / 42
80116-221
10.15
2 Volume for
COAG activa
-
tion
Volume setting of
the COAG activation
tones in 10
levels.
Activate setup: Press the yellow selection button.
The current setting appears in the
blue display.
Change settings: Press the blue Plus/Minus buttons.
The setting change appears in the
blue display.
Save setting change: Press and hold the top left selection
button until a check mark in the
adjacent display indicates the end of
the process.
Exit setup: Press the yellow selection button
again. The settings display goes out
in the blue display.
3 Volume but-
ton
Volume setting of
the buttons in 10
levels.
Activate setup: Press the yellow selection button.
The current setting appears in the
blue display.
Change settings: Press the blue Plus/Minus buttons.
The setting change appears in the
blue display.
Save setting change: Press and hold the top left selection
button until a check mark in the
adjacent display indicates the end of
the process.
Exit setup: Press the yellow selection button
again. The settings display goes out
in the blue display.
4 Warning tone
volume
Volume setting of
the warning tones in
8 levels.
Activate setup: Press the yellow selection button.
The current setting appears in the
blue display.
Change settings: Press the blue Plus/Minus buttons.
The setting change appears in the
blue display.
Save setting change: Press and hold the top left selection
button until a check mark in the
adjacent display indicates the end of
the process.
Exit setup: Press the yellow selection button
again. The settings display goes out
in the blue display.
No. Designation Description Use
To Next Page
Loading...
