Making and Receiving Calls 49
sent, the message ‘Sending’ displays.
Tip! You can enter a number of pauses, for example:
PHONE NO p CODE1 p CODE2 p CODE3
Note: During a pause you can press to send the
DTMF tones immediately.
It is also possible to access DTMF numbers stored in the Phone
book (flip closed) or Contacts (flip open) and to send the digits
as DTMF tones during a call. See “New Contact” on page 130 for
how to store a number.
Switching DTMF tones on and off
During a call, DTMF tones can be turned off in the Phone
menu for the benefit of the remote party during a call.
To turn DTMF tones on or off:
1. While on a call, scroll to DTMF tones in the Phone menu
using or , then press . The current setting is
highlighted.
2. Scroll to the desired setting and press .
Note: Some Phone menu options, such as DTMF tones, are
only available during an active call.
To turn DTMF tones on or off:
1. While on a call, in the Call application, tap and select
DTMF tones.
2. Select On or Off.
Call Holding
An active call is indicated in the display with the phone handset
symbol tilted up next to the connected name or number.
An active call can be placed on hold before setting up another
call or when answering a waiting call.
To put the active call on hold:
• Press .
or
• Scroll to Hold in the Phone menu using or , then press
.
Ericsson John
00:01
To Next Page
Loading...
