ero electronic MEMOCAL 2000 - Section 5 Error Messages; Load Errors

63
During OHM simulation, a measuring current lower than 100 mA
or higher than 2 mA can produce the following indication
SECTION 5 ERROR MESSAGES
5.1 LOAD ERRORS
During OHM simulation, a reverse measuring current causes the
"MISCON" indication on the display.
Revert the measuring wires.
OUT Ohm
MISCON W
-
OHM meter
OUT Ohm
------ W
+
-
OHM meter
+
M20-e-5.p65 7/9/01, 2:42 PM63