CUTMASTER A60
0-5428 PARTS LIST
6-1
SECTION 6:
PARTS LISTS
6.01 Introduction
A. Parts List Breakdown
The parts list provide a breakdown of all replaceable components. The parts lists are arranged as follows:
Section "6.03 Power Supply Replacement"
Section "6.04 Replacement Power Supply Parts"
Section "6.05 Options and Accessories"
Section "6.06 Torch Replacement Parts SL100SV Torch (w/Solenoid on Mounting Tube)"
Section "6.07 Torch Consumable Parts Automation / Machine (SL100)Torch"
Section "6.08 Torch Consumable Parts Manual (SL60)Torch"
Section "6.09 Replacement Parts for Hand Torch"
NOTE!
Parts listed without item numbers are not shown, but may be ordered by the catalog number
shown.
B. Returns
If a product must be returned for service, contact your distributor. Materials returned without proper authorization
will not be accepted.
6.02 Ordering Information
Order replacement parts by catalog number and complete description of the part or assembly, as listed in the parts
list for each type item. Also include the model and serial number of the power supply. Address all inquiries to your
authorized distributor.
6.03 Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, input power cable, gas
pressure regulator / lter, and operating manual.
Qty Description Catalog #
1 Cutmaster A60 Power Supply
208/230 - 460VAC, Single or 3 Phase, 60Hz,
With input power cable and plug 0559311341
Cutmaster A60 Power Supply with 460VAC,
Single or 3 Phase, 60Hz, With input power cable 0559311342
Cutmaster A60 Power Supply
with 400/415VAC, 3 Phase, 50Hz, with input power cable 0559311343
Cutmaster A60 Non CE Power Supply
with 600VAC, 3 Phase, 60Hz, with input power cable 0559311344
Cutmaster A60 CE Power Supply
with 600VAC, 3 Phase, 60Hz, with input power cable 0559311345
To Next Page
Loading...
