ESAB ESP-150 - Page 41

41
Material
Thickness
inch (mm)
Stando
inch (mm)
Speed
ipm (mm/m)
Start Gas and
Pressure
psig (bar)
Cut Gas and
Pressure
psig (bar)
Shield
Gas and Pressure
for ESP-150 and 200
psig (bar)
Carbon
Steel
0.12 (3.2)
0.19 (4.8)
190 (4826)
Air
30 (2.1)
Air
60 (4.1)
Air
50 (3.4)
0.25 (6.4) 100 (2540)
0.50 (12.7) 0.25 (6.4) 30 (762)
Aluminum
0.12 (3.2)
0.19 (4.8)
50* (1270)
0.25 (6.4) 70 (1778)
0.50 (12.7) 0.25 (6.4) 20 (508)
Stainless
Steel
0.12 (3.2)
0.19 (4.8)
75 (1905)
0.25 (6.4) 50 (1270)
0.50 (12.7) 0.25 (6.4) 20 (508)
Table 4.1 65 Amp Cut Data
SECTION 4 OPERATION