33
SECTION 3 INSTALLATION
1 Electrode Cable
2 Coolant Return Hose
3 Pilot arc Cable
4 Coolant Supply Hose
5 Work Cable
6 Work Piece
7 Earth Ground
8 Plasma Torch (PT-600 shown)
9 Shield Gas In (from gas supply)
10 Setup Pendant (Remote)
11 Cut gas In (from gas supply)
12 Start Gas (from gas supply)
13 Height Control
14 Torch Bundle (Cooling Water: Supply and Return, Current: Pilot Arc and Electrode)
15 Flow Control (Front)
16 Remote Plumbing Box Cable
17 Shield Gas (to Torch)
18 Plasam Gas (to Torch)
19 Gas Connections on Console (not used in this application)
20 CNC Cable
21 Restart Switch (used on CE version only)
22 Current Input (from wall disconnect – not shown)
PT-600 (and 19XLS) Interconnecting Diagram Legend
To Next Page
Loading...
