ESAB Rogue ET 200iP User Manual

3 TECHNICAL DATA
0463 769 001
- 9 -
© ESAB AB 2021
Rogue ET 200iP
Insulation class transformer H
Enclosure class IP23S
Application class
Mains supply, S
sc min
Minimum short circuit power on the network in accordance with IEC 61000-3-12.
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40°C/104°F, or below.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23S is intended for indoor and outdoor use; however, should not be
operated in precipitation.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.

ESAB Rogue ET 200iP Specifications

General

Brand	ESAB
Model	Rogue ET 200iP
Category	Welding System
Language	English