to your smart-mobile device(s), which would require higher internet bandwidth. Due to your local
internet environment condition, your mobile device(s) may display black-screen or temporary
disconnect to the Remote View Door Phone (RVDP).
speed) are suggested.
* For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
in order to receive maximum download speed. Actual performance will depend on the location’s
internet environment.
Relay Mode:
•
which might have slower internet connection speed and some video / audio latency might
occurs.
* By adjusting to “Better Streaming” in the system setting section may improve the APP
performance.
* If you have limited internet bandwidth, try to avoid more than two users connecting to the RVDP
simultaneously for best performance.
* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual
core processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve
transmission:
•
Change router/camera relative position to receive better signal.
•
Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi router.
•
Switch your router to 11b/g/n mode in order to improve router service range.
* Please use maximum 128GB of Micro SD card XC class 10 or Micro SD card XC class 10 UHS1.
16G Mirco SD card had been pre-insert in RVDP.
* Please note not all Android Devices can support hardware acceleration function, if your Android
mobile device can not work properly, please turn off the hardware acceleration function from the
APP.
To Next Page
Loading...
