Chapter 3 Commands
Table 3.2 Setting command list
Operation mode
Message Function Constant Program
CONSTANT Switches to the constant mode.
○
○
NORMAL Switches to the constant mode.
○
○
PROGRAM Switches to the program mode.
○
○
AMODE Sets the control mode.
○
○
CPAT Sets pattern No. for constant mode operation.
○
×
SET
Sets temperature, humidity and time for
constant mode operation.
○
×
TIME Sets only time for constant mode operation.
○
×
PPAT Sets pattern No. for program mode operation.
×
○
PSTP Sets step No. for program mode operation.
×
○
PSET Sets up program mode pattern.
×
○
ATIME Sets time of auto start timer.
○
○
START Starts operations.
○
○
SLOWFINISH Ends operations at end of current cycle.
○
○
QUICKFINISH Ends operations immediately.
○
○
KEYPROTECT Locks/Unlocks keys.
○
○
ERRESET Resets communication error log.
○
○
○
: Supported
×
: Not supported
21
To Next Page
Loading...
