ESPEC EHS-411M - To Monitor Control Mode Setting; To Monitor Operating Mode Setting

Chapter 3 Commands
■To Monitor Operating Mode Setting
Table 3.9 Operating mode setting monitor command
Monitor command
Address
Main
command
Optional
parameter
Description/Example command/Response format/Example
response
＜
Description
＞
This command requests the chamber to return the operating mode
setting.
＜
Example command
＞
“1,MODE?”
＜
Response format
＞
“operation mode code”
1 to 16 MODE?
−
＜
Example response
＞
“0”
・
The operating mode setting is returned as follows.

0: Constant mode

1: Program mode
■To Monitor Control Mode Setting
Table 3.10 Control mode setting monitor command
Monitor command
Address
Main
command
Optional
parameter
Description/Example command/Response format/Example
response
＜
Description
＞
This command requests the chamber to return the control mode
setting.
＜
Example command
＞
“1,AMODE?”
＜
Response format
＞
“control mode code”
1 to 16 AMODE?
−
＜
Example response
＞
“1”
・
The control mode setting is returned as follows.

1: Unsaturated

2: Saturated

3: Dry/Wet-bulb (For M-type chambers only)
25