Espressif ESP32 - Environment Setup; Environment Preparation; Hardware Preparation

!
2. Environment Setup
2. Environment Setup
2.1. Environment Preparation
2.1.1. Hardware Preparation
Table 2-1. Hardware Preparation
Name
Picture
Quantity
Description
ESP-WROOM-32 test
board
1
It comes with an ESP-WROOM-32 module
and a backplane.
ESP-WROOM-02 test
board
1
It comes with an ESP-WROOM-02 module
and a backplane.
Demo board
(ESP-Launcher without
a module)
1
The DUT communicates with the demo
board through the serial port.
Micro-USB cable
1
It connects the DUT and the PC.
PC
-
1
The PC runs relevant software.
Windows 7 OS is recommended.
5V power supply
-
1
It is the power supply for the DUT.
Tester
(IQView)
-
1
It tests the RF performance and shows the
test results.
!
Espressif
! /!2 19
2018.03