Espressif ESP32 - Introduction to the EspRFtestTool

!
3. Introduction to the EspRFtestTool
3. Introduction to the
EspRFtestTool
The EspRFtestTool includes the following features:
• Configurable download addresses of firmware, including RAM and flash
• Three RF test items: Wi-Fi, BT and manually-input-command tests
• Log output can be printed or saved
•
Online help documentation
Figure 3-1 shows the EspRFtestTool interface.
!
Figure 3-1. EspRFtestTool Interface
There are primarily four sections on the interface:
• Serial configuration: The configuration items include chip type, COM port, baud rate
and the status of the serial port.
• Download configuration: The configuration items include BIN-selection button,
download address (RAM or flash), download status and load bin (download button).
The status block, highlighted in yellow shows "SYNC", "LOAD", "SUCC" or "FAIL".
•
Test configuration: The test items include Wi-Fi, BT and manually-input-command
tests. Click on "start" to begin the test, and "stop" to terminate the test.
Espressif
! /!6 19
2018.03