Programming
; serial printer.
; SWITCH MASK - Selects which switches are active for both
; switch positions.
; CURRENT ID - Defines the base address of the LSRA.
; ERROR ACTION - This selection defines the action that is used to
; inform the FCC system of a local LSRA off normal
; condition.
;
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::::::::::::::::::::
MAX NODES 04 ; 01 - 64
CURRENT ID 04 ; 01 - 64
FIRE SYSTEM FCC A ; FCC A, FCC B
NETWORK CLASS A ; A, B
NETWORK BAUD 9600 ; 2400, 4800, 9600, 19200
GEO USA ; USA, CANADA, EUROPE
PRINTER TYPE NONE ; NONE, FORM, STRIP
PRINTER BAUD 9600 ; 2400, 4800, 9600
MSG ROUTE ALL ; ALARM, SUPERVISOR, TROUBLE, ALL
SWITCH MASK FF ; [0][0] - [F][F] [ ENABLE ][ DISABLED ]
ERROR ACTION 8999 ; 0000 - 9999
ANNUNCIATION GLOBAL ; LOCAL - GLOBAL
EXTERNAL MSG INACTIVE; ACTIVE - INACTIVE
; 0 1 2 3 4
; 01234567890123456789012345678901234567890
message 000001 Display node #1 has failed to communicate;
message 000002 Display node #2 has failed to communicate;
message 000003 Display node #3 has failed to communicate;
message 1000 Action 1000*****************************;
message 001501 Line 00 Panel 15 zone 01 ;
message 001502 Line 00 Panel 15 zone 01 ;
message 001503 Line 00 Panel 15 zone 01 ;
message 001504 Line 00 Panel 15 zone 01 ;
message 001505 Line 00 Panel 15 zone 01 ;
message 001506 Line 00 Panel 15 zone 01 ;
message 001507 Line 00 Panel 15 zone 01 ;
message 001508 Line 00 Panel 15 zone 01 ;
message 001509 Line 00 Panel 15 zone 01 ;
message 001510 Line 00 Panel 15 zone 01 ;
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
From the DOS prompt, type edit template.fcc and press
ENTER. Repeat the Editing Steps through the downloading steps
presented in this section.
LSRA Installation, Operation, Maintenance, and Configuration Manual 4.37
To Next Page
Loading...