eta plus ELC X Series - X100: Mains Connection

3 Installation page 15
ELC X-Series-V1.5-06.18-GB subject to technical alterations
3.2.8 X100: Mains connection
X4-X8: Fix the mains connection cables within the cable holder beneath the heat sink with
cable straps. The cables have to be laid behind the control connectors to reach the cable
gasket.
X12-X36: Fix the mains connection cables within the cable holder with cable straps. The
cables have to be laid beneath the board to reach the cable gasket.
Pay attention not to pinch the cables when closing the front hood.

L1
PE
L2
PE