eta plus ELC X Series - Connection Overview of Ballast Types X12 - X36; Overview Profile of the Cable Gasket X12 - X36

3 Installation page 10
ELC X-Series-V1.5-06.18-GB subject to technical alterations
3.2.4 Connection overview of ballast types X12 – X36
Fig. 7: Overview of electrical connections X12-X36
3.2.5 Overview profile of the cable gasket X12 – X36
The IP protection level given in chapter 6 is only guaranteed if every cable’s lead-in is
completely sealed.
For this purpose the following preconditions have to be fulfilled:
 Use cables of the nominal diameters given
in Table 2 on page 11. For the mapping to
the lead-ins in the cable gasket see Fig. 8.
 The gasket provides alternative lead-ins for
the use of several cable types.
Fig. 8: Profile of the cable gasket X12-X36
Mains connection
Control connections
Lamp
connection
Cable gasket
4
3
2
1
5
6
7
8
9
10
11
12
13