Etatron DLX - Parameters and Functions Layout; Typical Performance Characteristics

• 35 •
ENGL
I
SH
6.6 - PARAMETERS AND FUNCTIONS LAYOUT ( Factory default - pH)
FUNCTIONS
Setpoint setting
Hysteresis se tting
Choice of the type of intervention
Manual or proportional intervention selection
Definition of beginning intervention value "A UTO"
First point of calibration procedure
Second point of calibration procedure
Minimum alarm point
Maximum
alarm point
Over-dosing alarm value
Selection measures to control (pH, RX)
Chosen thermal selection (°C or °F)
Temperature compensation selection (manual - auto)
Delay at powering on
Delay exit calibration menu
DEFAULT
7,2
0,1
Acid
Manual
Setpoint + 1pH
-------
-------
0,00
14,00
99:59 h:m
pH
°C
Manual - 25°C
00:03 m:s
05:00 m:s
6.7 - TYPICAL CHARACTERISTICS
PARAMETER
Temperature
Max current relay output
pH measure
RX (mV) measure
VALUE
0÷40°C
6A (resistive load) 1A (inductive load)
0÷14 (0,01 pH)
-1000 ÷ +1400 (±1 mV)
DosingPump.ir