ETC PARADIGM - Connecting Wirelessly; Assign IP Address for Docking Station

Handheld Touchscreen and Wireless Accessories User Manual 9
Wireless Access Station Overview
The Wireless Access Station connects to the Paradigm control network over LinkConnect
and serves the Handheld Touchscreen as a wireless access point for MeshConnect
communication.
LinkConnect
LinkConnect uses Echelon® LonTalk® with LinkPower to connect by cable between the
Wireless Access Station and the Paradigm Architectural Control Processor (P-ACP). See
“LinkConnect Overview and Setup” on page 10.
MeshConnect
MeshConnect uses the Handheld Touchscreen built-in radio to communicate wirelessly
with a Wireless Access Station. See “MeshConnect Overview and Setup” on page 11.
Reference the Paradigm Wireless Access Station Installation Guide for more information.