Table of Contents
Table of Contents i
Introduction
1
Document Conventions 1
Help from ETC Technical Services 2
Overview
3
Safety and Warnings 3
Working Load Limit (WLL) 4
Hoist Specifications 4
Interface with Building
4
Physical Dimensions
4
Electrical Specifications
5
Lifting Specifications
5
Control and Feedback
5
Hoist Local Controls 5
Begin Hoist Installation
6
Tools Needed 6
Prepare the Installation Location 6
Unpack the Hoist 7
Install Coupler in Span Sections 7
Assemble the Hoist Sections 7
Attach TwinLine Clamps 9
Begin Cable Management Installation
10
Swag Cable Management 10
Helix Cable Management 10
Unpack and Prepare
10
Hang Helix from Upper Attachment Points
11