ETC Source Four User Guide

USER’S GUIDE
Source Four CDM Gobo projector
with remote magnetic control gear
CONTENTS
Before you start 2
Mounting & connecting the remote control gear 3
Installing the lamp 4
Focussing the luminaire 4
Using colour filter 4
Lamp Replacement 5
Routine maintenance 5
Source Four CDM diagram 6
Warranty 7
Specifications 7
www.enliten.co.uk/manuals/S4CDM.pdf
Page 1
This page is left intentionally blank

ETC Source Four Specifications

General

Type	Ellipsoidal Reflector Spotlight
Lens Tube Options	5°, 10°, 14°, 19°, 26°, 36°, 50°, 70°, 90°
Construction	Die-cast aluminum
Lamp Type	HPL
Wattage	575W, 750W
Voltage	120V or 230V
Dimensions	Varies with lens tube
Mounting	C-clamp
Beam Angle	Varies with lens tube
Field Angle	Varies depending on lens tube (consult ETC documentation)
Gate Size	3 in (76 mm)