ETC Source Four Assembly Guide

Copyright © 2015 Electronic Theatre Controls, Inc.
All Rights reserved.
Product information and specifications subject to change.
Part Number:
7060M2500-06.01 Rev B
Released: July 2015
Assembly Guide
Production Dates: September 2004 - Present
ATTENTION: The part numbers listed in this guide may differ from the parts
required for your particular Source Four fixture. Part numbers for
fixtures change occasionally as parts are replaced or upgraded.
To ensure that you are ordering the proper part for your specific
fixture, please contact your ETC dealer, or ETC Customer Service
for assistance.

ETC Source Four Specifications

General

Type	Ellipsoidal Reflector Spotlight
Lens Tube Options	5°, 10°, 14°, 19°, 26°, 36°, 50°, 70°, 90°
Construction	Die-cast aluminum
Lamp Type	HPL
Wattage	575W, 750W
Voltage	120V or 230V
Dimensions	Varies with lens tube
Mounting	C-clamp
Beam Angle	Varies with lens tube
Field Angle	Varies depending on lens tube (consult ETC documentation)
Gate Size	3 in (76 mm)