Need help?Do you have a question about the ETC Source Four and is the answer not in the manual?
General| Type | Ellipsoidal Reflector Spotlight |
|---|---|
| Lens Tube Options | 5°, 10°, 14°, 19°, 26°, 36°, 50°, 70°, 90° |
| Construction | Die-cast aluminum |
| Lamp Type | HPL |
| Wattage | 575W, 750W |
| Voltage | 120V or 230V |
| Dimensions | Varies with lens tube |
| Mounting | C-clamp |
| Beam Angle | Varies with lens tube |
| Field Angle | Varies depending on lens tube (consult ETC documentation) |
| Gate Size | 3 in (76 mm) |
Align lamp and adjust field for optimal beam characteristics.
Adjust lens tube position to achieve desired beam edge sharpness.
Modify beam shape using shutters, patterns, or iris.
Adjust barrel position for beam angle or pattern orientation.
Securely attach fixture to mounting pipe and adjust position.
Modify fixture height and angle for optimal placement.
Clean standard glass lenses using specified methods to maintain clarity.
Handle and clean 5° and 10° polymer lenses carefully to avoid damage.
Carefully clean the reflector for optimal light output and beam quality.
To Next Page
