14.Put the mixer blade back in place. Ensure that the marker on the
mixer blade is aligned with the flat part on the motor shaft.
15.Put the other cleaned parts back into the machine and connect the
hoses.
☞
The mixing compartment must latch securely in place to
prevent leaks. Ensure that the green catch snaps back
into place.
16.Switch the machine on at the on/off switch.
17.Place a 1.5 l cup under the dispenser holder.
18.Press button *00* on the service panel; clean valves + rinse mixers.
19.Check that nothing leaks.
20.Close the door of the machine.
4.7 Maintenance overview
The stickers with an overview of the maintenance activities to be
carried out are affixed on the inside of the door.
Figure 4-6
To Next Page
